Woodcut MillDrill

Woodcut MillDrill


Out of stock

Stuur mij een email als het product weer op voorraad is


This drill has been replaced by a better version of it: https://dehoutdraaierij.nl/en/shop/other/grinding-mechanisms/crushgrind-drill/


The Woodcut MillDrill is designed to drill the hole (with different diameters) in one movement for Crushgrind’s mechanisms. The production of pepper and salt mills is in this way more precise, faster and easier. The 2 HSS scrapers on the side of the head are adjustable, allowing the drill to be used for other purposes. and a 10 mm drill at the front of the DrillMill can be fitted to allow the most used Forstner drillbits. Useful!

Fits almost any bank.

The drill has a Morse Taper 2 arbor and therefore fits in most lathes. The 2 HSS scrapers are best to be sharpened with a diamond file…

Do I need more?

To use this drill for the crushgrindmaalwerken you will also need a 25 mm drill. The CrushGrind grinding mechanism clamps in the body of the herb mill. A ridge in the side of the drilled hole must be made. There is a chisel available with exactly the right dimensions. You use it only 2 seconds… These clamps can also be cut off from the grinding work, then the mechanism can be glued into the body.


Select a Pickup Point