Zelfcentrerende vierklauw Oneway chuck
Oneway Chuck
This chuck, or in good Dutch: "four jaw" is designed for super grip on smaller workpieces.
The smallest member of the chucks from Oneway. Unlike its larger brothers, this chuck is not operated with a gear wrench but with 2 pins.
Choose the thread of the shaft on which the four-jaw chuck should be mounted in the pull-down menu.
Like all Oneway four-jaw chucks, this chuck also has hardened steel on the essential parts.
The Stronghold jaws and the Talon/Oneway jaws are not interchangeable.
Talon and Oneway jaws are interchangeable.
If you want to know more about clamping or other woodturning techniques, watch the videos here.
| Screw thread | 1 - 10 LH or 1 – 10 RH or 1 – 12 RH or 1 – 14 RH or 1 – 8 TPI or 1-1/2 – 10 RH or 1-1/2 – 6 RH or 1-1/2 – 6 RH/LH BSW or 1-1/2 – 8 RH or 1-1/4 – 10 RH or 1-1/4 – 12 RH or 1-1/4 – 7 RH or 1-1/4 – 8 RH or 1-1/4 – 8 RH/LH or 1-1/8 – 12 RH or 1-1/8 – 12 RH/LH or 1-1/8 – 7 LH or 1-1/8 – 8 RH/LH. or 1-3/16 – 12 RH or 1-3/8 – 6 RH/LH BSW or 1/2 – 20 RH or 1¼ – 8 TPI or 3/4 – 10 RH or 3/4 – 12 RH or 3/4 – 16 RH or ¾ – 10 TPI or 5/8 – 11 RH or 5/8 – Plain or 7/8 – 12 55 deg LH or 7/8 – 12 RH or 7/8 – 14 LH or 7/8 – 14 RH or 7/8 – 16 RH or M12 * 1.5 or M18 * 2.5 RH or M20 * 1.5 RH or M20 * 2 RH or M20 * 2.5 LH or M24 * 3 RH or M25 * 2 RH or M25 * 3 RH or M25 x 1,5 mm or M27 * 2 RH or M30 * 1.5 RH or M30 * 3.5 RH or M32 * 7 RH or M33 x 3.5 or M40 * 6 RH or 1-1/8 - 8 RH/LH or 3/4 - 16 LH or 7/8 - 16 LH |