Worktop oil from DeCokerije has been developed for finishing and maintaining kitchen tops, worktops and other worktops or workbenches. Only natural ingredients have been used in this worktop oil. It is not a problem if food comes into contact with the worktop. This oil contains no solvents. Can be diluted with turpentine oil.

Instructions for use:

• For bare wood, if desired, thin the first two layers 30% and 10% respectively with turpentine oil.
• Apply the oil with flat brush. And apply extra oil where the surface immediately absorbs the oil
• Leave for approximately 30 minutes
• Remove excess oil with clean cloths so that no oil remains on the surface. Leave cloths spread out to dry!
• Apply 1 coat per day and apply as many coats until the wood no longer absorbs anything. You naturally treat the wood all around, including the underside.
• Any remaining oil can be stored for future maintenance in a Stoplossbag. 
• After use, the brushes can be cleaned with White Spirit.

Consumption

Worktop oil is available in half-litre cans. That is usually enough to complete a worktop. How much you need obviously depends greatly on how hard the surface is absorbent. But usually half a liter is sufficient for 10 square meters.

Attention!

After applying the worktop oil, work can be done after a few hours. But the oil only fully hardens after a week or two. Therefore, use water and acids carefully at first and give the oil sufficient time to harden completely...

View the other products from deCokerije here.