self centering Stronghold chuck (body)
Stronghold chuck (body)
The Stronghold 'heavy duty chuck' is designed for super grip on larger workpieces.
This is the heaviest chuck from Oneway. The diameter of the body is approximately 13 cm. The chuck comes without jaws but with an adapter for the spindle of your lathe. Choose the thread of your lathe in the pulldown menu.
Oneway Stronghold chucks:
- are made of high quality steel.
- have 'nickel plated' bodies.
- have hardened jaws and teeth
- have a 'manganese phosphate' coated sprocket wrench. For a pleasant grip and against rust.
- with one-hand operation of the gear wrench.
- have the patented Over-Extension Safety System. This ensures that the jaws do not come loose from the body during work.
- Robust design. The different parts can take a beating
Choice of jaw
There are different jaws available for the Stronghold chucks. Click here for an overview of all jaws.
- Spigot jaws - small turning
- No. 3 and No. 4 jaws - for bowls and vases. These jaws can be supplied both smooth and ribbed.
- No. 5 and No. 6 jaws - for large bowls. These jaws can be supplied both smooth and ribbed and are made of aluminium
- Jumbo jaw - for finishing the bottom of dishes, for example.
- flat jaws - to create your own formd jaw
The Stronghold jaws and the Talon jaws are not interchangeable.
Screw thread | 1 - 10 LH or 1 – 10 RH or 1 – 12 RH or 1 – 14 RH or 1 – 8 TPI or 1-1/2 – 10 RH or 1-1/2 – 6 RH or 1-1/2 – 6 RH/LH BSW or 1-1/2 – 8 RH or 1-1/4 – 10 RH or 1-1/4 – 12 RH or 1-1/4 – 7 RH or 1-1/4 – 8 RH or 1-1/4 – 8 RH/LH or 1-1/8 – 12 RH or 1-1/8 – 12 RH/LH or 1-1/8 – 7 LH or 1-1/8 – 8 RH/LH. or 1-3/16 – 12 RH or 1-3/8 – 6 RH/LH BSW or 1/2 – 20 RH or 1¼ – 8 TPI or 3/4 – 10 RH or 3/4 – 12 RH or 3/4 – 16 RH or ¾ – 10 TPI or 5/8 – 11 RH or 5/8 – Plain or 7/8 – 12 55 deg LH or 7/8 – 12 RH or 7/8 – 14 LH or 7/8 – 14 RH or 7/8 – 16 RH or M12 * 1.5 or M18 * 2.5 RH or M20 * 1.5 RH or M20 * 2 RH or M20 * 2.5 LH or M24 * 3 RH or M25 * 2 RH or M25 * 3 RH or M25 x 1,5 mm or M27 * 2 RH or M30 * 1.5 RH or M30 * 3.5 RH or M32 * 7 RH or M33 x 3.5 or M40 * 6 RH or 1-1/8 - 8 RH/LH or 3/4 - 16 LH or 7/8 - 16 LH |