Melamine lacker spray can
Fast-drying glossy lacquer
Melamine lacquer is a wear-resistant, heat-resistant, waterproof, fast-drying, high-gloss lacquer in an aerosol can. The melamine lacquer is, just like Chestnut's sanding sealer, on a cellulose basis. The lacquer dries in 5 minutes (!), so it is very suitable for use on the lathe. The paint is mixed with a catalyst in the can. This will start working once the paint has dried. After 7 days the paint has reached 90% of its hardness. After about 2 weeks the paint reaches maximum strength and toughness. By the way, you don't have to take this into account, only if you want to use it immediately in extreme circumstances. Melamine lacquer is also available in a tin for application with a brush. But the properties mentioned here make it easier to apply it with a spray can. For best results, apply at least 3 coats. Spray can 400 ml.
Gloss
Once the melamine lacquer has been applied, the workpiece is ready. You can increase the shine by sanding again with sanding fleece (or something else, grit 800 or 1000 or similar). ) and then treat again with a friction polish liquid or cream. You can reduce the shine slightly with a sanding fleece of slightly lower grit. A wash can also be placed over it. The workpiece then feels softer.
Consumption
approximately (depending on the number of layers) up to 4 m2 per spray can.
Usage
Spray several thin layers for the best result. Also adheres to untreated dry wood. Can also be used outdoors.
Tips
Use a sanding sealer on a cellulose basis to apply the melamine lacquer.
Security
Avoid inhaling the vapor and use it in a well-ventilated area.