Midi Pro
THE MIDI PRO. A newly designed table lathe for the demanding user
The new generation of lathes is often equipped with an extra bench bed that is perpendicular to the spindle. The MIDI PRO is prepared for this. The headstock can be moved and rotated. Both the head and the lower part of the tool rest can be easily pushed onto the optional extra bed. A new and high-quality lathe of the latest generation.
During the construction extra value was placed on stability and versatility. It is still a space-saving bench with a support width of 30 cm and a bench bed length of 80 cm. Compared to the Midi and Midi 2, the bench bed is also significantly heavier.
The front opening on the bench bed allows the installation of a small, optionally available extra bed. This makes it possible to work comfortably and ergonomically outside the normal between the centers.
lathe bed
- Solid cast iron bench bed
- Extra wide contact surface of 30 cm for a solid stand. (Small benches only have 15-20 cm)
- Opening at the front of the bed to add an extra bed.
- "Park position" for the tailstock. The lower part of the hand rest can be removed from the front through the opening in the bench bed.
- The bench bed can be extended by up to 91 cm by attaching one or two extensions on the left and right.
- A quick-change system allows the additional bed to be easily installed at the various mounting points. (Optionally available)
- Incl. carrying handles
headstock
Solid cast-iron head, rotatable and movable over the entire length of the bedways.
Triple bearing of the spindle with wide bearing spacing.
M33x3.5 thread with safety device and MT2 mount.
Powerful 750 watt (1HP) motor with frequency converter, 3 belt positions and Poly-V belt drive.
Digital speed display.
Movable switch box with magnetic attachment.
Extra long hand wheel.
Spindle stop with magnetic pin.
Part setup with 24 steps (every 15°)
Including double MT 2 cone for quick and precise alignment of the point alignment.
Spindle head swivel with grid system.
Center height 178 mm, possible turning diameter 355 mm.
tailstock
Solid cast iron tailstock.
MT 2 in quill, 100 mm quill travel
The quick change system of the quill allows the use of a drill quill with ER25 collets. (Optionally available)
So you don't need a drill chuck and you keep the entire center distance.
The trapezoidal thread of the quill can absorb greater forces and is particularly suitable for fast drilling.
Hand wheel with handle.
Midi Pro Specifications
Motor 0.75 kW / 1 HP (230 V)
Center height 178 mm
Distance between centers 450 mm
Dimensions: 1160x420x470mm
Width at max distance between centers: 1160 mm
Quill travel: 100 mm
Lathe bed length: 795 mm
Speeds: 60 - 1000 / 150 - 1900 / 350 - 3700 rpm
Spindle head: rotatable and movable
Max. turning diameter above the bed: 360 mm
Part setup: 24 steps
Speed control: Inverter and with 3 belt pulleys
Forward/Reverse Run: Yes
Weight: 65kg
tool rest post: 1" / 25.4 mm
Bearing distance: 100 mm
Mobile control box: yes
Quill: MT2 with scale on the quill
Spindle thread: M33 x 3.5 mm DIN 800 with MT2 mount
scope of delivery
Midi Pro
Drive center MK2
revolving center MK2
250 mm tool rest
Faceplate 80 mm
carrying handles
ejector rod
Double cone Mt2 for aligning the point alignment
| uitvoering | inclusief poten or tafelmodel |