The small powerhouse.
This Midi 350 FU small lathe towers with head and shoulders from above lathes of the same size. Both with power and precision:-frequency control to change the RPM. -An engine of 750 W.-Extremely quiet loop. -centring of fixed axle and loose head superior in this class. The bench is completely made of cast iron. The sofa is milled and polished. The bench has the right place to hold handles so it is possible to easily move this 43 kg weighing machine. The most beautiful pens can be made on this lathe, which is exactly enough for IE. In addition, the 1 horsepower engine and the frequency control also ensure that scales (max. 34 cm) can also be made. The machine has 3 pulleys where the drive belt runs over it. There is always a transfer to be found that combines strength and speed in the right way.
-Center height/maximum diameter: 175 mm/350 mm-distance between centers: 400 mm-Speeds: 80-800/170-1700/350-3700 U/min-Movable control cabinet (with magnets), on/off switch, forward/reverse switch and speed control. – Digital Speed Readout – Motor: 0.75 kw/1 hp (230 V) – threaded on the axle: M33 x 3.5 and axle recording MC2 – loose head: MC2 with a cm distribution on the Pinoe. -Pinoe 10 mm pierced. -Thread: M33 x 3.5 MC2-Loose head: MC2, Pinoe range 55 mm and 10 mm by bore. -2 handles – a very good readable 24 step asvergrendeling – Beitelsteunas: 1 inch (25.4 mm) – Weight: approx. 43kg – Max Sizes: L x W x H: 865 x 330 x 415 mm-Loose head: MC2, Pinoe range 55 mm.
-Participant-swivelling against center-chisel support 150 mm-clamping plate 80 mm-5 years warranty optional for this bank available: