active full face mask with helmet AIRFLOW
active full face mask AIRFLOW
air freshener
helmet.
A face mask with air exchange and a helmet. The blower unit hangs on your back on a belt around your waist. The air is blown into the helmet through a flexible hose. The whole thing weighs only 830 grams and you only hear the airflow. The blowing mask works with overpressure. The thick and clear face shield complies with the EN 166 standard. Suitable for working at the lathe. The helmet naturally meets the strictest European standards. HDPE helmet shell, adjustable interior, shock-absorbing padding in the edges and a rear headband Complies with the European standard EN 397. A 5.2 Ah lithium ion battery lasts all working day and is fully charged in about 3 hours with an included charger and a sturdy plug.
Visor
The visor is thick and complies with the EN 166 standard. It can be opened upwards. Handy if you want to talk to a colleague...
Air is blown in
The pump that blows the air can be set in three positions. 170 l/min, 210 l/min or 250 l/min, this is the maximum airflow with clean filters. (For comparison, a human uses about 50 liters per minute).
Filters
The filter of this unit is a TH3P filter. This is the highest class and is also widely used for welding work, for example. The filters are easy to replace and clean, valve open filter out, clean, replace, valve closed. It is recommended to check the filters regularly during daily use. Do not blow out the filters with a compressor, but knock them out. This can significantly extend its lifespan. The filters consist of 3 layers. first a stainless steel net filter, then a carbon filter and finally a TH3P R SL particulate filter. If the filters become clogged, the device will indicate this itself.
Replacement filters are of course also available. For spare filters click here.
Included is:
- Helmet with visor.
- Inflatable unit.
- Air hose
- 5.2 Ah lithium ion battery.
- charger with power cord and plug
- 2 filters (1 for the unit and 1 spare)
- Manual
- 1 year warranty.